The NCV97311A is 3?output regulator consisting of a low?Iq battery?connected 3 A 2 MHz non?synchronous switcher and two low?voltage 1.5 A 2 MHz synchronous switchers; all using integrated power transistors. The high?voltage switcher is capable of converting a 4.1 V to 18 V battery input to a 5 V output at a constant 2 MHz switching frequency, delivering up to 3 A. In overvoltage conditions up to 36 V, the switching frequency folds back to 1 MHz; in load dump conditions up to 45 V the regulator shuts down. The output of the battery?connected buck regulator serves as the low voltage input for the 2 synchronous switchers. Each downstream output is adjustable from 1.2 V to 3.3 V, with a 1.5 A current limit and a constant 2 MHz switching frequency. Each switcher has independent enable and reset pins, giving extra power management flexibility. For low?Iq operating mode the low?voltage switchers are disabled, and the standby rail is supplied by a low?Iq LDO (up to 150 mA) with a typical Iq of 30 A. The LDO regulator is in parallel to the high?voltage switcher, and is activated when the switcher is forced in standby mode. All 3 SMPS outputs use peak current mode control with internal slope compensation, internally?set soft?start, battery undervoltage lockout, battery overvoltage protection, cycle?by?cycle current limiting, hiccup mode short?circuit protection and thermal shutdown. An error flag is available for diagnostics |
!注意:請使用瀏覽器自帶下載,迅雷等下載軟件可能無法下載到有效資源。
器件 | 類型 | 描述 | 數據手冊 |
---|---|---|---|
NCV97311A | Converters | Automotive Battery-Connected Low-Iq Multi-Output Power Management Unit with 3 Buck Regulators | 點擊下載 |
歡迎加入EEWorld參考設計群,也許能碰到搞同一個設計的小伙伴,群聊設計經驗和難點。 入群方式:微信搜索“helloeeworld”或者掃描二維碼,備注:參考設計,即可被拉入群。 另外,如您在下載此設計遇到問題,也可以微信添加“helloeeworld”及時溝通。
EEWorld Datasheet 技術支持