The FAN324x “smart” dual-coil relay drivers are designed to drive bi-stable polarized latching relays that connect and disconnect electrical power in smart electronic meters. The FEBFAN324x_001NDA evaluation board is designed to evaluate any of the products in the FAN324x series, such as FAN3240 or FAN3241.
The output of the FAN324x is rated for operation with supply rails from 8 V to 60 V. The filter / timer block prevents inadvertent switching from noisy input signals by providing input-pulse qualification (tQUAL) and maximum output pulse-width limit (t MAX). The parameters are factory adjustable and additional configurations are available. XOR input protection is also provided to prevent both outputs from being on at the same time. The Under-Voltage Lockout (UVLO) function disables the outputs until the supply voltage is within the operating range. The FAN324x has two separate driver channels for the relay-open and relay-close signals needed to operate dual-coil relays. One enable/disable pin allows shutdown of both channels independent of the input signals. An internal thermal shutdown (TSD) function is provided for thermal protection. This FEBFAN324x_001NDA evaluation board uses a two-layer Printed Circuit Board (PCB). The size of the board is designed to be small enough to be evaluated in confined spaces of the meter. Its form factor is 45.72 x 20.32 mm (1.8 x 0.8 inches). |
Features
|
|
Applications
|
!注意:請使用瀏覽器自帶下載,迅雷等下載軟件可能無法下載到有效資源。
器件 | 類型 | 描述 | 數據手冊 |
---|---|---|---|
FAN3240 | Load Drivers & Relay Drivers | 60V Smart Dual-Coil Relay Drivers | 點擊下載 |
歡迎加入EEWorld參考設計群,也許能碰到搞同一個設計的小伙伴,群聊設計經驗和難點。 入群方式:微信搜索“helloeeworld”或者掃描二維碼,備注:參考設計,即可被拉入群。 另外,如您在下載此設計遇到問題,也可以微信添加“helloeeworld”及時溝通。
EEWorld Datasheet 技術支持