The STEVAL-ISA207V1 evaluation board is a step-down switching power supply based on the A7987 regulator in an HTSSOP16 package. It is designed for automotive system battery-powered applications. The output voltage can be set starting from 0.8 V. Almost low drop-out operation, due to the advanced integrated switch management, can be achieved.
The A7987 is a 61 V, 3 A step-down asynchronous switching regulator with embedded high-side power MOSFET is capable of delivering up to 3 A of current, depending on the application conditions.
The embedded switchover feature on the VBIAS pin and the light load management (pulse skipping) are included to maximize power conversion efficiency across the entire load range, and the soft-start current limit threshold and switching frequency can be adjusted according to specific application requirements.
The device includes an internal 250 kHz oscillator that can be set up to 1.5 MHz by changing an on-board resistor. Two A7987 regulators can be synchronized in a 180° out-of-phase configuration for reduced total input RMS current.
主要特性
!注意:請使用瀏覽器自帶下載,迅雷等下載軟件可能無法下載到有效資源。
器件 | 類型 | 描述 | 數據手冊 |
---|---|---|---|
A7987 | 降壓穩壓器 | 61 V 3A異步降壓開關穩壓器,電流限值可調,用于汽車應用 | 點擊下載 |
歡迎加入EEWorld參考設計群,也許能碰到搞同一個設計的小伙伴,群聊設計經驗和難點。 入群方式:微信搜索“helloeeworld”或者掃描二維碼,備注:參考設計,即可被拉入群。 另外,如您在下載此設計遇到問題,也可以微信添加“helloeeworld”及時溝通。
EEWorld Datasheet 技術支持